1
?/DIV>
FN9129
ISL6413
Triple Output Regulator with Single
Synchronous Buck and Dual LDO
The ISL6413 is a highly integrated triple output regulator
which provides a single chip solution for wireless chipset
power management. The device integrates high efficiency
synchronous buck regulator with two ultra low noise LDO
regulators. The IC accepts an input voltage range of 3.0V to
3.6V and provides three regulated output voltages: 1.8V
(PWM), 2.84V (LDO1), and another ultra-clean 2.84V
(LDO2).
The Synchronous current mode PWM regulator with
integrated N- and P-channel power MOSFET provides pre-
set 1.8V for BBP/MAC core supply. Synchronous
rectification with internal MOSFETs is used to achieve higher
efficiency and reduced number of external components.
Operating frequency is typically 750kHz allowing the use of
smaller inductor and capacitor values. The device can be
synchronized to an external clock signal in the range of
500kHz to 1MHz. The PG_PWM output indicates loss of
regulation on PWM output.
The ISL6413 also has two LDO regulators which use an
internal PMOS transistor as the pass device. LDO2 features
ultra low noise that does not typically exceed 30礦 RMS to
aid VCO stability. The EN_LDO pin controls LDO1 and
LDO2 outputs. The ISL6413 also integrates a RESET
function, which eliminates the need for additional RESET IC
required in WLAN applications. The IC asserts a RESET
signal whenever the V
IN
supply voltage drops below a preset
threshold, keeping it asserted for at least 25ms after V
IN
has
risen above the reset threshold. The PG_LDO output
indicates loss of regulation on either of the two LDO outputs.
Other features include over current protection for all three
outputs and thermal shutdown.
High integration and the thin Quad Flat No-lead (QFN)
package makes ISL6413 an ideal choice to power many of
todays small form factor industry standard wireless cards
such as PCMCIA, mini-PCI and Cardbus-32.
Features
" Fully Integrated Synchronous Buck Regulator + Dual LDO
" High Output Current (For QFN package)
- PWM, 1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mA
- LDO1, 2.84V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mA
- LDO2, 2.84V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA
" Ultra-Compact DC-DC Converter Design
" Stable with Small Ceramic Output Capacitors
" High conversion efficiency
" Low Shutdown supply current
" Ultra-Low Dropout Voltage for LDOs
- LDO1, 2.84V. . . . . . . . . . . . . . . 125mV (typ.) at 300mA
- LDO2, 2.84V. . . . . . . . . . . . . . . 100mV (typ.) at 200mA
" Ultra-Low Output Voltage Noise
- <30礦
RMS
(typ.) for LDO2 (VCO Supply)
" PG_LDO, PG_PWM and PG_PWM
outputs
" Extensive circuit protection and monitoring features
- Over voltage protection
- Over current protection
- Shutdown
- Thermal Shutdown
" Integrated RESET output for microprocessor reset
" Proven Reference Design for Total WLAN System
Solution
" QFN Package
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat
No Leads - Product Outline
- Near Chip-Scale Package Footprint Improves PCB
Efficiency and Is Thinner in Profile
Applications
" WLAN Cards
- PCMCIA, Cardbus32, MiniPCI Cards
- Compact Flash Cards
" Liberty Chipset
" Hand-Held Instruments
Related Literature
" TB363 - Guidelines for Handling and Processing Moisture
Sensitive Surface Mount Devices (SMDs)
" TB389 - PCB Land Pattern Design and Surface Mount
Guidelines for QFN Packages
Ordering Information
PART NUMBER TEMP. RANGE (
o
C) PACKAGE PKG. DWG. #
ISL6413IR
-40 to 85
24 Ld QFN L24.4x4B
Data Sheet
October 2003
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright ?Intersil Americas Inc. 2003. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ISL6432CB-T
IC REG QD BCK/LINEAR 16-SOIC
ISL6521CBZS2698
IC REG QD BCK/LINEAR 16-SOIC
ISL6528CBZ-TS2698
IC REG DL BCK/LINEAR SYNC 8-SOIC
ISL6529CBZ
IC REG DL BCK/LINEAR SYNC 14SOIC
ISL6534CVZ-TR5229
IC REG 3OUT BCK/LINEAR 24EPTSSOP
ISL6549CRZR5213
IC REG DL BCK/LINEAR SYNC 16-QFN
ISL9305IRTHWLNCZ-T
IC REG QD BUCK/LINEAR 16TQFN
ISL9305IRTWLNCZ-T
IC REG QD BUCK/LINEAR 16TQFN
相关代理商/技术参数
ISL6414EVAL1
功能描述:EVAL BOARD 1 FOR ISL6414 RoHS:否 类别:编程器，开发系统 >> 评估板 - 线性稳压器 (LDO) 系列:* 产品变化通告:1Q2012 Discontinuation 30/Mar/2012 设计资源:NCP590MNDPTAGEVB Gerber Files 标准包装:1 系列:- 每 IC 通道数:2 - 双 输出电压:1.8V，2.8V 电流 - 输出:300mA 输入电压:2.1 ~ 5.5 V 稳压器类型:正，固定式 工作温度:-40°C ~ 85°C 板类型:完全填充 已供物品:板 已用 IC / 零件:NCP590MNDP 其它名称:NCP590MNDPTAGEVB-NDNCP590MNDPTAGEVBOS
ISL6414IR
制造商:Rochester Electronics LLC 功能描述:TRIPLE OUTPUT LOW DROPOUT LINEAR REG. WITH FAULT PIN MODIFIC - Bulk 制造商:Intersil Corporation 功能描述:
ISL6414IRZ
功能描述:低压差稳压器 - LDO VER OF ISL6414IR RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20
ISL6414IRZ-TK
功能描述:低压差稳压器 - LDO VER OF ISL6414IR-TK RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20
ISL6415I WAF
制造商:Intersil Corporation 功能描述:
ISL6415IR-TK
制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Intersil Corporation 功能描述:
ISL6416IA
功能描述:IC REG LDO 1.8V/2.8V/2.8V 16QSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.2 V ~ 5.5 V 输入电压:1.7 V ~ 5.5 V 电压 - 压降（标准）:0.075V @ 400mA 稳压器数量:1 电流 - 输出:400mA（最小值） 电流 - 限制（最小）:400mA 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) 其它名称:296-20789-2V62/06626-01XE
ISL6416IA-TK
功能描述:IC REG LDO 1.8V/2.8V/2.8V 16QSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.2 V ~ 5.5 V 输入电压:1.7 V ~ 5.5 V 电压 - 压降（标准）:0.075V @ 400mA 稳压器数量:1 电流 - 输出:400mA（最小值） 电流 - 限制（最小）:400mA 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) 其它名称:296-20789-2V62/06626-01XE